| Telon technology introduces you to maintain the belt conveyor belt belt method. 1. The conveyor belt of the belt conveyor should be kept clean during transportation and storage, avoid direct sunlight or rain or snow, avoid contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device. 2. The temperature of the warehouse should be kept between 18-40 °C and the relative humidity should be kept between 50-80% . 3, belt conveyor during storage, the product must be placed in Rolls, not folded, should be turned over every quarter conveyor belt. 4, different types, specifications layer number of conveyor belt should not be connected together to use, the best use of the joint bonding method. 5, belt conveyor belt type, structure, specifications, layer number should be reasonable selection based on the use of conditions. 6. The speed of conveyor belt of belt conveyor should not be more than 2.5 m / s, the material with big block size and abrasion and the unloading device with fixed pear should be as low as possible. 7. The relation between the diameter of the driving drum and the cloth layer of the conveyor belt, the matching of the driving drum and the redirection drum, and the requirement of the supporting roller groove angle should be selected reasonably according to the design regulation of the belt conveyor. Feeding Direction should follow the direction of belt conveyor belt operation, in order to reduce the impact of material falling belt conveyor conveyor belt should adopt clay groove, reduce the material falling distance; Belt Conveyor material receiving section should shorten the distance between idlers and use buffer idlers for material leakage, Conveyor Belt compliant with the use of soft moderate baffle, so as to avoid the plate too hard, scratch belt conveyor belt. Oh, Shit
|
